Project ScratchDuino Blade with holder
From scratchduino
(Difference between revisions)
(Created page with " __TOC__ ==Link to author's page== [http://wiki.robbo.ru/wiki/%D0%A3%D1%87%D0%B0%D1%81%D1%82%D0%BD%D0%B8%D0%BA:Valeriypivkov Link to author's page (Valeri Pivkov)] ==Descr...") |
|||
| Line 7: | Line 7: | ||
==Description of the project== | ==Description of the project== | ||
| − | + | This detail will be useful in the competition for pushing objects out of the circle. The advantages of this part is that it does not interfere with the installation of an infrared sensor. Also, "Blade" will be modeled so that it will be installed above the sensor, thereby not interfering with its operation and slightly forward. In this way, the sensor will not touch the obstacle. The part consists of two parts that are connected together. This is done so that there are no problems with printing on a 3D printer. | |
| − | this is | + | |
| − | + | ||
| − | + | ||
[[Image:Project ScratchDuino Blade with holder.jpg|thumb|100px|left|finished model]] | [[Image:Project ScratchDuino Blade with holder.jpg|thumb|100px|left|finished model]] | ||
Revision as of 07:03, 27 April 2018
Contents |
Link to author's page
Link to author's page (Valeri Pivkov)
Description of the project
This detail will be useful in the competition for pushing objects out of the circle. The advantages of this part is that it does not interfere with the installation of an infrared sensor. Also, "Blade" will be modeled so that it will be installed above the sensor, thereby not interfering with its operation and slightly forward. In this way, the sensor will not touch the obstacle. The part consists of two parts that are connected together. This is done so that there are no problems with printing on a 3D printer.
